Welcome to TriRig.com

Blue Triad SL Review
images by Nick Salazar
Nov 20, 2011  hits 71,259

Just a fun little shot I took when dialing in my position on the Blue. It was a great bike to ride, and I was sad to see it go out the door.
Just a fun little shot I took when dialing in my position on the Blue. It was a great bike to ride, and I was sad to see it go out the door.
Previous Photo
Next Photo
Back to article: Blue Triad SL Review


Tags » blue,  frames,  triadsl
  • The Blue Triad SL, in all its glory.
  • The Triad SL's bayonet fork is easy to wrench. Just a single M6 bolt locks it down, and the aero spacers work just like standard spacers on a round fork.
  • The aero spacers are a nice compromise between usability and aerodynamics. Still, it's generally a good idea to pick a bike that fits you without many spacers, if any.
  • The aerobar is a nice bit of kit indeed.
  • Minimal bolts on the bar: one (or two) for each arm cup, and one for each extension. Compare that to fourteen bolts for the Speed Concept.
  • The underside of the bar is nice and clean, no junk hanging out.
  • As usual, my first order of business was to slap on my trusty Dash Tri.7 saddle.
  • The rear end is angular and mean-looking.
  • Another shot of the rear cluster.
  • Just a single bolt grabs the extensions - this is a very nice bar to work with.
  • The rear brake cable housing is lined internally, making it SUPER easy to install.
  • The rear derailleur cable is internally-lined as well for easy installation, but you have to order a frame specific to either cabled systems or Di2 - beware if you plan to upgrade in the future.
  • BB30 means just about any crank will fly on this machine, though you may need an adapter.
  • The bike looks great equipped with SRAM Red and a 54-tooth chainring.
  • You can see the large shim in the background - normally this would be trimmed, but Blue asked that I didn't cut the fork down any further, so it stayed on. The shim itself is what gets compressed by the headset - not the stem - so it was a simple matter to ride slammed without cutting the fork. That's a nice feature to have if you're still fine-tuning your position.
  • Add on a slim brake like this rare Hooker SL, and the frontal profile is as clean as they come.
  • I was loaning this brake from Heath Dotson of HDcoaching.net, just for the photos. It would be nice if there were a more readily-available brake of this kind ... and I think I'm going to look into producing one - stay tuned!
  • It looks lean and mean, and it rides that way too.
  • The Blue Triad SL
  • Another shot of the Hooker SL brake that I borrowed from Heath Dotson of HDcoaching.net
  • The fork uses a standard 1-inch headset and bearings, so it's easy to find replacement parts if necessary.
  • Blue hides the rear brake beneath the bottom bracket, a move that many manufacturers are doing these days. This one isn't as sleekly integrated as the brakes on the TM01, Speed Concept, or Felt DA, but this is exactly what Specialized has done with their rear brake for years, and it's worked out well for them.
  • Just a fun little shot I took when dialing in my position on the Blue. It was a great bike to ride, and I was sad to see it go out the door.

Related Articles
This Shiv is my personal ride, dressed to the nines and built with the finest gear in the sport. Enjoy the detailed writeup and supersized gallery.
Cervelo has just unveiled a ground-up redesign of its most popular tri-bike, dressed in P5 DNA and ready to rock transition areas everywhere.
In a previous article, we went over every aspect of the bare P5 frame in detail. Now we take you through building it up.
We're building up a project P5, but before the components go on, we're taking a thorough look at this smart new frame.
Orbea took their time developing the successor to the original Ordu, and to be rather frank, I'd say that the wait was worth it.

comments powered by Disqus