Welcome to TriRig.com

Lighten Up - ENVE Wheels
article & images by Nick Salazar
Feb 16, 2011  hits 34,624

Specs
  • Enve Tubular Rims (1.45 front, 1.65 rear)
  • Sapim CX-Ray Spokes
  • Unbranded Hubs
  • Continental Sprinter 22mm Tires
  • 1140g (without tires)
Our wheels are a 1.45 front, 1.65 rear for an ideal mix of light weight, handling, and aerodynamics

A good set of wheels is at the heart of any bicycle build. After all, the word bicycle literally means "two wheels." For the Lighten Up series, we wanted to build a set of wheels that was aero, but saved significant weight over the standard set of aero offerings you usually see. Finding that balance between weight and aerodynamics isn't an easy thing to do, and some readers will probably disagree with our choices here. But suffice it to say, we're satisfied. These wheels rock.

The Inputs

Our starting point was the venerable rims from ENVE Composites (pronounced "envy", formerly Edge Composites). Their claim to fame is an advanced manufacturing process that produces rims that aren't just lighter than the competition, they're also supposedly stronger on account of the fact that the spoke holes are molded right into the rim, rather than drilled out later. The spoke holes are also very narrow, because the nipples are internal. That is potentially advantageous from an aerodynamic perspective, since the bulky spoke nipples are hidden from the wind. But it also makes truing the wheel a little harder, because it must be done with the tires off.

We went for the 45mm 1.45 tubular front rim, and the 65mm 1.65 tubular rear rim. Having a deeper rear wheel than front improves handling on account of the so-called sail effect, and making the front shallower allowed us to save some weight. Our rims are 290g and 350g, respectively, which is amazing considering their depth.

Hub duties went to an OEM set which we bought unbranded, but which comes stocked on some wheelsets you may have seen around. They're light, proven, and were quite easy to build up. At 277g for the set, they beat out a lot of so-called lightweight hubs, and didn't break the bank. Lacing everything up with Sapim CX-Rays was a no-brainer, as it's the de-facto standard in aero wheels.

The End Result

So what'd we end up with in the end? A pretty sweet set of hoops. At just 1140g, they are scarcely heavier than a set of Zipp 202's ... but they're quite a bit deeper, and much stiffer. They may not feature the superlative aerodynamics of some sets like the Zipp Firecrest wheels, but they definitely don't tip the scales quite as much.

The final result is a wheelset that will work in just about any racing scenario from a hill climb, to a flat course, and will handle well even in harsh crosswinds. And with a non-disc rear, this wheelset is legal everywhere, including Kona. The wheels are easy to service, since they use a standard hub and spokes. Lighter wheelsets like Madfibers use integrated spokes that cannot be replaced in the event of a break, and can never be trued. We opted to take the 60g weight penalty over the Madfiber wheels to have a set like this, which seems more usable for the long haul. These are born to race, but might as well be everyday trainers, as durable as they are.

Pros
  • Very light, stiff, and aero wheels
  • Non-integrated hubs means easier serviceability and more build options
 
Cons
  • Rim profiles aren't as developed as other brands
  • Internal spokes means the tires have to come off to true the wheel

If you want wheels that are light, aero, and durable, look no further than ENVE.
Rating: 4.5


Tags » enve,  lightenup,  wheels
  • This 1.65 tubular wheel is deep, aero, and surprisingly light.
  • We paired the ENVE rims with unbranded hubs that are supplied as OEM hubs in other wheelsets.  They are lighter than DT Swiss 190's, but every bit as usable.
  • Formerly called Edge, ENVE keeps most of the same graphics, but an updated logo.
  • We used a shallower 1.45 front wheel (left), and a deeper 1.65 rear (right) to help with handling in crosswinds, and keep the weight down.
  • The ENVE logos look the same upside down and right side up
  • The pair looks stunning together.
  • The tubular rims are a good match with the 22mm Continental Sprinter tires we put on.  We picked those wheels for their balanced specs - they have respectable rolling resistance and ride quality, are moderately narrow, quite puncture resistant, and have a great ride quality.
  • You can be forgiven for spelling these E-N-V-Y, because we know you want them.

Related Articles
You've heard the debate time and time again. Here's TriRig's concise take on the age-old argument.
Our Lighten Up Series is finally complete. This featherweight aero machine came in at just 12.9 pounds, and feels like it could float in air.
Last year, Mavic unveiled its new CXR aero platform, and is expanding it this year with new rim depths and clincher versions.
The new FLO 30 wheel represents the next logical step in FLO's growing product base. Here's our full review of the new hoops.
The boutique saddle maker from Boulder has a new seat on offer, as well as their first complete wheel, an 890-gram disc.